Home About Us Products Contact Us Feedback
Enertech India
Enertech Line
   Peristaltic Pumps
Enertech Line
   Dry Baths
Enertech Line
Enertech Line
   PCR Thermal Cycler Substitute
Enertech Line
   Microplate Instrumentation
Enertech Line
   Ultrasonic Cleaning Equipments
Enertech Line
   Liquid Dispensing Systems
Enertech Line
   Computerised Formulation Makers
Enertech Line
   XYZ Positioning Systems
Enertech Line
   Electro Surgical Equipment
Enertech Line
  Liquid Despensing Systems
  Benchtop Liquid Dispensing Systems
    Robotic Liquid Dispensing Systems
  Automated Syringe Pumps
  State Your Requirment
  Ask A Question?
Welcome to Enertech
  ENPD-130 Peristaltic Dispenser

ENAD-113 PNEUMATIC LIQUID DISPENSERPeristaltic Pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because it is advisable to limit operator contact and peristaltic pumps are air free. The model ENPD-130 offers excellent features for air-free dispensing of materials such as cyanoacrylates, solvents, alkalines and acids. Dispense outputs can be timed from 0.1 to 99.99 seconds with flow speeds from 0.1 - 100 ml / min using Teflon tubing and from 0.1 - 200 ml / min using silicone tubing. The pump is bi-directional allowing suck-back after discharge to prevent dripping of the fluid.

Air-free dispensing.
Forward and reverse motion.

Instant reverse for suck-back cuts off liquid flow.

Simple load mechanism also provides easy cleaning.

Teflon and silicone tube options.
Continuous or timer modes.
Large segment digital LED display.

Output signal to indicate end of dispense cycle.

Clean room compatible.

Suitable for small shots and continuous operation.

Adjustable rotor speed in volume 0 -10.

Self priming from bottle or jar.

For larger discharges at higher flow rates, silicone tubing is used.

System operated by finger switch on holder or remotely from I/O.

Connector at rear of unit.

Timer display counts down for discharge.




200 mm (l) x 200 mm (w) x 100 mm (h)

 Weight @ 3 kg
 Input Voltage

110 V & 220 V models 50 / 60 Hz

 Dispense time 0.1 - 99.99 seconds
 Cycle initiation Continuous & timed
 Flow speed 0.1 - 100 ml / min (Teflon tube)
0.1 - 200 ml / min (Silicone tube)
 Dispense Pressure Over 1.5 kg / cm2
 Direction of pump Both direction (Forward / Reverse)
 Suck-back Programmable by reverse rotation
 Digital display Time count down
 I/O Connection for remote operation
   Back Top